Kit manifolds
Distributor HV 60/125 (2 m3/h - 50 kW). For 2 and 3 DN25 pump units.
Distribution header with insulation suitable for power up to 50 kW (rise in temperature ΔT=20 K in the primary circuit).
Maximum flow rate up to 2 m3/h - Max. 6 bar.
Insulation box section size: 110 x 110 mm.
Connections to the pump units: 1” Male, centre distance 125 mm (pitch 250 mm).
Connection to the hydraulic switcher cod. HW60/125-04 threaded end 1” Male (centre distance 125 mm); for the connection use n. 2 set cod. 04629SET (1”).
Maximum flow rate up to 2 m3/h - Max. 6 bar.
Insulation box section size: 110 x 110 mm.
Connections to the pump units: 1” Male, centre distance 125 mm (pitch 250 mm).
Connection to the hydraulic switcher cod. HW60/125-04 threaded end 1” Male (centre distance 125 mm); for the connection use n. 2 set cod. 04629SET (1”).
Item | Use | Lenght | Code |
HV 60/125-2 | For connection to no. 2 DN25 units | 508 mm | HV60/125-2 |
HV 60/125-3 | For connection to no. 3 DN25 units | 758 mm | HV60/125-3 |
Distributor HV 80/125 (7,25 m3/h - 165 kW), for the connection from 2 up to 6 DN32 pump units.
Distribution header with insulation suitable for power up to 165 kW (rise in temperature ∆T = 20 K in the primary circuit). The double connection supply/return allows the placement of the hydraulic switcher both on the left and on the right side: in this way you can avoid to rotate the distributor and to reverse the supply and return pipes towards the user. Moreover the two covers made of galvanized cast iron, 2” female threaded, required to isolate the two unused connections of the distributor are also included.
Maximum flow rate up to 7,25 m3/h - Max. 6 bar.
Insulation box section size: 152 x 152 mm.
Connections to the pump units: 1” 1/4 Male, centre distance 125 mm (pitch 250 mm).
Connection to the hydraulic switcher code HW80/570-07 threaded end 2” Male; to make the connection please use the kit code 07629SETHW80 (2”) that includes the required components.
Maximum flow rate up to 7,25 m3/h - Max. 6 bar.
Insulation box section size: 152 x 152 mm.
Connections to the pump units: 1” 1/4 Male, centre distance 125 mm (pitch 250 mm).
Connection to the hydraulic switcher code HW80/570-07 threaded end 2” Male; to make the connection please use the kit code 07629SETHW80 (2”) that includes the required components.
Model | Use | Lenght | Code |
HV 80/125-2 | For the connection to no. 2 DN32 units | 625 mm | HV80/125-2 |
HV 80/125-3 | For the connection to no. 3 DN32 units | 875 mm | HV80/125-3 |
HV 80/125-4 | For the connection to no. 4 DN32 units | 1125 mm | HV80/125-4 |
HV 80/125-5 | For the connection to no. 5 DN32 units | 1375 mm | HV80/125-5 |
HV 80/125-6 | For the connection to no. 6 DN32 units | 1625 mm | HV80/125-6 |